産業用カメラ Pixelink® PL-D7718
| Color Space C = Color Interface U = USB Housing BL = Board Level T = Trigger |
型式一覧
カラー
| 入出力型式 | パッケージ | カメラ単体 |
| USB3.0 micro-B のみ | フル ハウジング | PL-D7718CU |
| トリガー入力 コネクタ付き | PL-D7718CU-T |
|
| ボードタイプ コネクタ1,2,3,4 | PL-D7718CU-BL |
|
仕 様
| 撮像素子 | |
| Sensor | On Semi AR1820 |
| Type | CMOS Global Shutter |
| Resolution | 18 MP (4912 x 3680) |
| Pixel Pitch | 1.25µm x 1.25µm |
| Active Area | 7.67 mm diagonal |
| 出力信号 | |
| FPN | <1% of signal |
| PRNU | <2% of signal |
| Dynamic Range | 60.5 dB |
| Bit Depth | 8-bit and 12-bit |
| Color Data Formats | Bayer 8, Bayer 12 Packed, Bayer 16 and YUV422 |
| フレームレート | |
| Resolution | Free Running |
| 4912 x 3680 | 14 fps |
|
Frame rates will vary based on host system and configuration *Above calculations based on 8-bit pixel depth. |
|
| 規格 耐久性 | |
| Compliance | FCC, CE & RoHS |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -45°C to 85°C |
| 一般仕様 | |
| Dimensions (mm) | 55 x 38.5 x 30.00 |
| Weight (g) | 35.8 (Board level without optics) |
| Mounting | C-Mount |
| Voltage Required | 5V DC (from USB connector) |
| 使用可能ソフトウェア | |
| Pixelink Capture | Control & operate multi-camera |
| Pixelink SDK | Software Development Kit |
| Pixelink μScope | Acquisition, analysis & reporting |
| 3rd. Party U3V Vision Applications | |
Operating System
| Windows | Linux x86 | Linux ArmV7 | Linux ArmV8 | |
| Processor | Intel i5 or better | Intel i5 or better | Arm7 (32 bit) | Arm8 (64 bit) |
| Memory | 4GB recommended | 4GB recommended | 2GB | 2GB |
| Hard Drive Space | 150 MB | 150 MB | 50 MB | 50 MB |
コネクタ・ピンアサイン
USB3.0 コネクタ
Interface | Date rate： USB 3.0 | Micro-B | 5Gbps 固定具あり
| Pin | Pin Name | Function |
| 1 | VBUS | VBUS (Power output from USB3 cable) |
| 2 | TRIGGER+ | TRIGGER + (optically isolated) |
| 3 | TRIGGER- | TRIGGER – (optically isolated) |
| 4 | GPO1+ | GPO1 + (optically isolated) |
| 5 | GPO1- | GPO1 – (optically isolated) |
| 6 | GPO1 HCMOS | GPO1, 3.3V HCMOS output (I2C – SCL for autofocus) |
| 7 | GPO2 HCMOS | GPO2, 3.3V HCMOS output (I2C – SDA for autofocus) |
| 8 | GROUND | logic and chassis ground |
Connector Hirose round 8-pin
ボード・ピンアサイン
USB3.0 コネクタ
Interface | Date rate： USB 3.0 | Micro-B | 5Gbps 固定具なし
8 pin コネクタ
| Pin | Pin Name | Function |
| 1 | 3.3 V | +3.3V power output |
| 2 | /TRIGGER | TRIGGER/GPI 3.3V HCMOS input |
| 3 | GROUND | Ground |
| 4 | GPO1 | GPO1, 3.3V HCMOS output |
| 5 | GPO2 | GPO2, 3.3V HCMOS output |
| 6 | CLOCK | Clock, 3.3V (I2C access for OEMs) |
| 7 | DATA | Data, 3.3V (I2C access for OEMs) |
| 8 | n/c | No Connection |
Board connector: Molex (8-pin, 1.25mm pitch, vertical);
Cable receptacle:Molex 51021-0800; Cable crimp terminals: Molex 50079-8100
外形寸法
感度特性
メーカーWEBページはこちら