産業用カメラ Pixelink® PL-D752
| Color Space C = Color M = Mono Interface U = USB Housing BL = Board Level T = Trigger |
型式一覧
カラー
| 入出力型式 | パッケージ | カメラ単体 |
| USB3.0 micro-B のみ | フルハウジング | PL-D752CU |
| トリガー入力 コネクタ付き | PL-D752CU-T | |
| ボードタイプ コネクタ1,2,3,4 | PL-D752CU-BL | |
モノクロ
| 入出力型式 | パッケージ | カメラ単体 |
| USB3.0 micro-B のみ | フルハウジング | PL-D752MU |
| トリガー入力 コネクタ付き | PL-D752MU-T | |
| ボードタイプ コネクタ1,2,3,4 | PL-D752MU-BL | |
仕 様
| 撮像素子 | |
| Sensor | Sony IMX174 |
| Type | CMOS Global Shutter |
| Resolution | 2.3 MP (1920 x 1200) |
| Pixel Pitch | 5.86 μm x 5.86 μm |
| Active Area | 13.4 mm diagonal |
| 出力信号 | |
| FPN | < 0.03% of signal |
| PRNU | < 0.4% of signal |
| Dynamic Range | 70 dB |
| Bit Depth | 8 or 12-bit |
| Color Data Formats | Bayer 8, Bayer 12 Packed, Bayer 16 & YUV422 |
| Mono Data Formats | Mono 8, Mono 12 Packed & Mono 16 |
| フレームレート | |
| Resolution | Free Running |
| 1920 x 1200 | 166.6 fps |
| 1280 x 1024 | 194.2 fps |
| 640 x 480 | 398.2 fps |
| Frame rates will vary based on host system and configuration *Above calculations based on fixed frame rate mode |
|
| 規格 耐久性 | |
| Compliance | FCC, CE & RoHS |
| Shock & Vibration | 300 G & 20 G (10Hz – 2KHz) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -45°C to 85°C |
| 一般仕様 | |
| Dimensions (mm) | 55 x 38.5 x 30.23 |
| Weight (g) | 35.8 (Board level without optics) |
| Mounting | C-Mount |
| Voltage Required | 5V DC (from USB connector) |
| 使用可能ソフトウェア | |
| Pixelink Capture | Control & operate multi-camera |
| Pixelink SDK | Software Development Kit |
| Pixelink μScope | Acquisition, analysis & reporting |
| 3rd. Party U3V Vision Applications | |
Operating System
| Windows | Linux x86 | Linux ArmV7 | Linux ArmV8 | |
| Processor | Intel i5 or better | Intel i5 or better | Arm7 (32 bit) | Arm8 (64 bit) |
| Memory | 4GB recommended | 4GB recommended | 2GB | 2GB |
| Hard Drive Space | 150 MB | 150 MB | 50 MB | 50 MB |
コネクタ・ピンアサイン
USB3.0 コネクタ
Interface | Date rate： USB 3.0 | Micro-B | 5Gbps 固定具あり
| Pin | Pin Name | Function |
| 1 | BUS | Power output from USB3 cable, shared with camera, typically +5 VDC. |
| 2 | TRIGGER+ or GPI+ | Positive terminal of optically isolated trigger input or General Purpose Input. |
| 3 | TRIGGER- or GPI- | Negative terminal of optically isolated trigger input or General Purpose Input. |
| 4 | GPO1+ | Positive terminal of optically isolated General Purpose Output 1. |
| 5 | GPO1- | Negative terminal of optically isolated General Purpose Output 1. |
| 6 | GPO1 HCMOS | 3.3V HCMOS General Purpose Output 1. |
| 7 | GPO2 HCMOS | 3.3V HCMOS General Purpose Output 2. |
| 8 | GROUND | Logic ground. |
Connector Hirose round 8-pin
ボード・ピンアサイン
USB3.0 コネクタ
Interface | Date rate： USB 3.0 | Micro-B | 5Gbps 固定具なし
8 pin コネクタ
| Pin | Pin Name | Function |
| 1 | 3.3 V | +3.3 VDC power output |
| 2 | /TRIGGER | /TRIGGER input |
| 3 | GROUND | Logic and chassis ground |
| 4 | GPO1 | General Purpose Output 1 |
| 5 | GPO2 | General Purpose Output 2 |
| 6 | CLOCK | I2C Clock |
| 7 | DATA | I2C Data |
| 8 | n/c | No Connection |
Board connector: Molex (8-pin, 1.25mm pitch, vertical);
Cable receptacle:Molex 51021-0800; Cable crimp terminals: Molex 50079-8100
6 pin コネクタ
| Pin | Pin Name | Function |
| 1 | VBUS | Power output from USB3 cable, shared with camera, typically +5 VDC |
| 2 | GROUND | Logic and chassis ground |
| 3 | DATA | I2C Data |
| 4 | CLOCK | I2C Clock |
| 5 | n/c | No connection |
| 6 | n/c | No connection |
Board connector: JST(6pin,1mm pitch,vertical)
Cable receptacle:JST SHR-06V-S-B; Cable crimp terminals: JST SSH-003T-P0.2
外形寸法
感度特性
メーカーWEBページはこちら