産業用カメラ Pixelink® PL-X9512

Color Space
　C = Color
　M = Mono
Interface
　G= 10 GigE
Housing
　BL = Board Level
　T = Trigger

型式一覧

撮像素子
Sensor	Sony IMX253
Type	CMOS Global Shutter
Resolution	12 MP (4096 x 3000)
Pixel Pitch	3.45μm x 3.45μm
Active Area	17.6 mm diagonal
出力信号
FPN	< 0.03% of signal
PRNU	< 0.7% of signal
Dynamic Range	70 dB
Bit Depth	12 bit
Color Data Formats	Bayer 8, Bayer 12 Packed, Bayer 16, YUV422, RGB 24, BGR 24
Mono Data Formats	Mono 8, Mono 12 Packed & Mono 16
フレームレート
Resolution	Free Running
3208 x 2200	Up to 91 fps
Frame rates will vary based on host system and configuration * Above calcula?? ons based on fi xed frame rate mode.
規格　耐久性
Compliance	FCC, CE & RoHS
Shock & Vibration	300 G & 20 G (10Hz – 2KHz)
Operating Temperature	0°C to 50°C
Storage Temperature	-45°C to 85°C
一般仕様
Dimensions (mm)	125 x 57 x 57
Weight (g)	560
Mounting	C-Mount
Voltage Required	5V (from USB Type-C connector), 48V (802.3bt PoE)
使用可能ソフトウェア
Pixelink Capture	Control & operate multi-camera
Pixelink SDK	Software Development Kit
OS
Operating System	Windows 7/8/10 – Windows 10 recommended Ubuntu 16.04/18.04/20.04

Pin	Function
1	M-12 X-Coded Ethernet Connector – Used for ethernet. The M12 X-coded male to RJ45 male Cat6a cable can be used here to connect the camera to a NIC or switch.
2	USB-C Power Connector – If you’re not using PoE to power the camera, connect the 30W power supply here.
3	M-12 Hirose Receptacle (HR25A-9R-12SA) – For external trigger/GPIO

Pin	Function
1	M-12 X-Coded Ethernet Connector – Used for ethernet. The M12 X-coded male to RJ45 male Cat6a cable can be used here to connect the camera to a NIC or switch.
2	USB-C Power Connector – If you’re not using PoE to power the
3	8pin　1.25pitch　Hirose Receptacle (51021-0800) – For external trigger/GPIO

Pixelink社　Knowledge Base の以下のページをご参照ください。
フルハウジングタイプ
 ボードレベルタイプ